Will Prado 150 wheels fit a Land Cruiser 250?

Not as a direct swap. Both are 6�139.7, but the 250 hub is 95.1 mm, the stud is M14�1.5, and factory offset is ET60 or ET70 rather than ET25.

Why is the GX offset ET70 when VX is ET60?

GX wears the narrower 245/70R18 on a 7-inch rim at ET70. VX and ZX use a 7.5-inch rim at ET60 with 265-section tires.

Is the 250 the same wheel mount as the Land Cruiser 300?

Both are 6�139.7, 95.1 mm and M14�1.5. Offset and rim width still differ by grade, and the torque figure on the 250 rows is 131 Nm rather than 140 Nm.

Land Cruiser 250 shares the Prado 150 hole count, not the hub or the nut

The Land Cruiser 250, sold as the new Prado in many markets, kept a 6�139.7 bolt circle and then changed the rest of the mount. The hub bore is 95.1 mm, not the 106.2 mm of the 150-series Prado. The stud is M14�1.5, not M12�1.5. Factory offset is ET60 on VX and ZX, and ET70 on the narrower GX wheel.\n\nAn older Prado alloy can share the six holes and still not go on. An M14 stud does not pass a hole drilled for an M12 nut, a 106 mm bore is loose on a 95.1 mm hub, and ET25 places the tire roughly 35 mm further out than ET60.\n\nThe 300 uses the same 6�139.7, 95.1 mm hub and M14�1.5 stud, so the bolt pattern matches the 250. Rim width and offset still do not. The 250 GX wheel is 18�7 at ET70. VX and ZX are 7.5 inches wide at ET60, in 18-inch and 20-inch diameters. Lug torque on the 250 rows is 131 Nm, not the 140 Nm listed for the 300.\n\nThe table covers 2024, 2025 and 2026.

ModelAll 300 250 200 100 80 90 Prado

Year

Make / model / trim	Year	Tire	Rim width (in)	Rim diam. (in)	Bolt pattern	Offset ET	Bore DIA	Torque	Mounting
Toyota Land Cruiser 250 GX	2026	245/70R18	7	18	6×139.7	70	95.1	131 Nm	M14*1,5
Toyota Land Cruiser 250 VX	2026	265/65R18	7.5	18	6×139.7	60	95.1	131 Nm	M14*1,5
Toyota Land Cruiser 250 ZX	2026	265/60R20	7.5	20	6×139.7	60	95.1	131 Nm	M14*1,5
Toyota Land Cruiser 250 GX	2025	245/70R18	7	18	6×139.7	70	95.1	131 Nm	M14*1,5
Toyota Land Cruiser 250 VX	2025	265/65R18	7.5	18	6×139.7	60	95.1	131 Nm	M14*1,5
Toyota Land Cruiser 250 ZX	2025	265/60R20	7.5	20	6×139.7	60	95.1	131 Nm	M14*1,5
Toyota Land Cruiser 250 GX	2024	245/70R18	7	18	6×139.7	70	95.1	131 Nm	M14*1,5
Toyota Land Cruiser 250 VX	2024	265/65R18	7.5	18	6×139.7	60	95.1	131 Nm	M14*1,5
Toyota Land Cruiser 250 ZX	2024	265/60R20	7.5	20	6×139.7	60	95.1	131 Nm	M14*1,5

FAQ

Will Prado 150 wheels fit a Land Cruiser 250?: Not as a direct swap. Both are 6�139.7, but the 250 hub is 95.1 mm, the stud is M14�1.5, and factory offset is ET60 or ET70 rather than ET25.
Why is the GX offset ET70 when VX is ET60?: GX wears the narrower 245/70R18 on a 7-inch rim at ET70. VX and ZX use a 7.5-inch rim at ET60 with 265-section tires.
Is the 250 the same wheel mount as the Land Cruiser 300?: Both are 6�139.7, 95.1 mm and M14�1.5. Offset and rim width still differ by grade, and the torque figure on the 250 rows is 131 Nm rather than 140 Nm.

Tire size calculatorShow

Compare two tire sizes — diameter, speedometer error, and clearance change.